HaseMed Electrode Spray

Overview

HaseMed Electrode Spray is a ready-to-use contact medium supplied in handy pump-spray bottles from 250 ml up to 6 L. Formulated for daily use in ECG, EEG and EMG diagnostics, it lowers skin impedance, improves electrode adhesion and delivers cleaner, more reproducible traces on wet-gel, dry and adhesive electrodes alike. The compact pump bottle is designed for point-of-care workflows where a targeted, metered spray is faster and more hygienic than decanting a gel or cream.

The formulation is hypoallergenic, formaldehyde-free and non-greasy, so it can be applied throughout the shift without leaving residue on the skin, on leads or on patient gowns. HaseMed ECG electrode spray is CE-marked and manufactured under the EU Medical Device Regulation (MDR 2017/745), making it a dependable consumable for hospitals, cardiology practices, neurology departments, mobile services and sports-medicine labs across Europe.

Key benefits

• Stable signal quality: Consistently low contact impedance supports clean ECG, EEG and EMG traces with fewer baseline artefacts.
• Fast pump-spray application: Metered spray wets the contact area in seconds, no pouring, no wasted product, no cross-contamination from shared tubes.
• Hypoallergenic and formaldehyde-free: Skin-friendly composition suitable for repeated use on sensitive patients and for long monitoring sessions.
• Non-greasy, easy to remove: Leaves no oily film, so electrodes reposition reliably and the skin wipes clean after the recording.
• Compatible with standard electrodes: Works with common wet-gel, self-adhesive and reusable cup electrodes used in routine diagnostics.
• Workflow efficiency: Reduces preparation time and the need to reposition loose electrodes during long recordings.

Clinical context

Signal fidelity in surface electrophysiology depends largely on the electrode-skin interface. A dry stratum corneum, residual lotions or sweat raise impedance and introduce motion artefacts, which can mask clinically relevant findings such as ST-segment changes, low-amplitude EEG rhythms or fine EMG potentials. Applying a thin, even layer of HaseMed Electrode Spray before electrode placement hydrates the contact zone, improves ionic coupling and stabilises the baseline, so that clinicians can interpret recordings with confidence.

The pump-bottle format (250 ml, 500 ml, 1 L, 3 L, 6 L) is optimised for rooms with moderate daily throughput: cardiology consulting rooms, EEG suites, occupational-health clinics, home-visit bags and teaching labs. For high-volume or central sterile supply departments that refill smaller dispensers, HaseMed also offers larger 5 L to 20 L canisters as a separate SKU.

Application

1. Prepare the skin: remove oils, creams or make-up and let the area dry.
2. Shake the bottle briefly and hold the pump 10 to 15 cm from the contact site.
3. Apply one to two sprays directly onto each electrode position.
4. Place the electrode, press gently and verify adhesion.
5. Start the recording as usual; re-spray individual sites if a long session requires it.

For external use only. Do not apply to broken or irritated skin. Avoid contact with the eyes and mucous membranes. Store the bottle upright, closed, in a cool and dry place away from direct sunlight.

Package contents

• 1 x HaseMed Electrode Spray in the selected size: 250 ml, 500 ml, 1 L, 3 L or 6 L
• Integrated fine-mist pump dispenser (on 250 ml and 500 ml bottles)
• Product label with batch and expiry information

Frequently asked questions

Is HaseMed Electrode Spray compatible with disposable adhesive electrodes?
Yes. A light mist on the skin before placement improves conductivity without compromising the adhesive. Avoid soaking the electrode pad itself.

Can it replace electrode gel for long-term monitoring?
For recordings beyond a few hours, a conductive gel or paste is usually preferred. The spray is ideal for routine ECG, resting EEG, EMG and short monitoring sessions where a quick, even application is required.

Which size should I choose?
Select 250 ml or 500 ml for mobile bags and single consulting rooms, 1 L for busy practices, and 3 L or 6 L for departments that refill pump bottles regularly. For central supply or teaching hospitals, see the HaseMed 5 L to 20 L canister format.

Is the product CE-marked?
Yes. HaseMed Electrode Spray is CE-marked and supplied in line with the EU Medical Device Regulation (MDR 2017/745).