وسایل کمک به نوشیدن
لیوان لبهدار و لیوان دستهدار ارگونومیک از HaseMed برای سالمندان و افراد با تحرک محدود. لبه 4 میلیمتر برای مایعات رقیق و لبه 12 میلیمتر برای سوپ و مایعات غلیظ. جنسی که در ماشین ظرفشویی شسته میشود، برای کاربرد بهداشتی در مراقبت و توانبخشی.
راهنمای خرید لیوان لبهدار
لیوان لبهدار زمانی کمک میکند که بلند کردن لیوان معمولی ریختن ایجاد کند یا نیروی دست کم باشد. دو اندازه لبه دو کاربرد متفاوت دارد و انتخاب باید با وضعیت فرد هماهنگ شود.
لبه 4 میلیمتر
لبه باریک جریان کوچک و کنترلشده میدهد. برای بلع دشوار، پس از سکته مغزی یا وقتی مقدار کم در هر جرعه لازم است مناسب است. لیوان دستهدار با لبه 4 میلیمتری برای این وضعیت ساخته شده است.
لبه 12 میلیمتر
لبه پهنتر جریان طبیعیتری میدهد و برای سوپ، اسموتی و مایعات غلیظ مناسب است، جایی که لبه باریک مسدود میشود. این مدل آگاهانه پهنتر از لیوانهای ویژه بلع است.
دسته و جنس
دسته به فرد امکان میدهد لیوان را با نیروی کم نگه دارد. جنس پلیپروپیلن است و بدون BPA. درپوش باید درست بنشیند؛ درپوش کج شایعترین علت چکیدن است.
لیوان جای ارزیابی گفتاردرمانی را نمیگیرد. غلظت مایع و اندازه لبه باید با برنامه درمانی هماهنگ شود.
نکتههای کاربرد و بهداشت
یک لیوان که درست انتخاب و درست شسته شود، در مراقبت روزانه تفاوت میسازد.
کاربرد
- لیوان را تا حدی پر کنید که با یک جرعه نوشیده شود.
- در وضعیت نیمهنشسته، سر و گردن را در راستای طبیعی نگه دارید.
- غلظت مایع را پیش از ریختن در لیوان بررسی کنید، نه پس از آن.
شستوشو
لیوان، درپوش و لبه را جدا کنید، باقیمانده مایع غلیظ را آب بکشید و پیش از سوار کردن دوباره خشک کنید. شستوشو در ماشین ظرفشویی تنها در صورتی که دستور مصرف مدل آن را اجازه دهد. پس از شستوشو بررسی کنید که لبه تغییر شکل نداده باشد.
در بخش
برای هر فرد لیوان مشخص با نام او در نظر بگیرید تا در توزیع جابهجا نشود. برای سفارش مجدد، اندازه لبه و مدل را یادداشت کنید.
مقررات بازپرداخت و مجوزهای محلی از کشوری به کشور دیگر متفاوت است.
Expert Knowledge: Standards & Quality
Drinking aids for medical and care use are subject to specific quality and safety requirements. Understanding the relevant regulations helps in selecting suitable products.
EU Regulation (EC) No 1935/2004: Food Contact Materials
Drinking aids come into direct contact with beverages and food. They must therefore comply with the European regulation on food contact materials. This means that no harmful substances may be transferred to the drink. HaseMed drinking aids are made from food-grade, BPA-free polypropylene and are approved for repeated contact with hot and cold beverages.
EU Regulation (EU) No 10/2011: Plastics in Food Contact
This implementing regulation specifies the requirements for plastic materials that come into contact with food. It sets migration limits for individual substances and prescribes a total migration maximum of 10 mg/dm². HaseMed plastic drinking aids are tested against these limits and fully comply with the requirements.
DIN EN ISO 13485: Quality Management
Drinking aids classified as medical devices or assistive devices fall under the requirements of DIN EN ISO 13485. This standard demands seamless quality management from design to delivery, including validation of manufacturing processes, control of materials used, and documentation of product specifications.
Expert Standard for Nutrition Management (DNQP)
The expert standard on "Nutrition Management for Securing and Promoting Oral Nutrition in Nursing" from the German Network for Quality Development in Nursing (DNQP) recommends the targeted use of drinking aids for patients with nutritional and fluid deficits. Care facilities are encouraged to develop individual hydration plans and provide suitable aids.
Assistive Devices Directory (GKV-Spitzenverband)
Drinking aids such as sippy cups and special drinking cups can, under certain conditions, be reimbursed by statutory health insurance in Germany. They are listed in the assistive devices directory under product group 02 (adaptation aids). A medical prescription documenting the medical need is required.