HaseMed Electrode Spray

Overview

HaseMed Electrode Spray in bulk canisters is a professional contact medium for ECG, EEG and EMG electrodes, designed to improve signal quality and lower contact impedance at the skin-electrode interface. The large-format 5L, 10L and 20L canisters are aimed at high-volume users such as cardiology and neurology departments, sleep laboratories, stress-ECG suites, EMS services and teaching hospitals that need a reliable, reproducible conductive medium across many daily measurements. A thin, even mist prepares the skin in seconds, supports stable recordings over long sessions and leaves no greasy residue that would interfere with adhesive electrodes or downstream cleaning.

Compared with the smaller 250ml to 6L pump bottles, these bulk canisters are optimised for central supply rooms, refill stations and procurement teams that want to consolidate orders, reduce packaging waste and lower the cost per measurement without changing the familiar HaseMed formulation.

Key benefits

• Bulk format for high-volume users: 5L, 10L and 20L canisters built for clinics, sleep labs and EMS fleets with heavy daily electrode use.
• Improved signal quality: Lowers skin-electrode contact impedance for stable ECG, EEG and EMG recordings with fewer motion and baseline artefacts.
• Fast, clean application: A fine, even mist prepares the skin in seconds without cotton pads, gels or additional accessories.
• Skin-friendly, hypoallergenic formulation: Suitable for routine professional use on adult and geriatric patients in clinical and mobile settings.
• Residue-controlled: Leaves no sticky film on the skin or on common ECG and EEG electrode surfaces, simplifying electrode removal and post-measurement cleaning.
• Reproducible workflows: Supports consistent preparation protocols across shifts, operators and departments for quality assurance and teaching.
• Refill-friendly logistics: Bulk canisters reduce packaging volume per litre and make central decanting into smaller HaseMed bottles straightforward.

Clinical context & who is it for

Dry skin, sebum, body hair and residual skin care products all increase contact impedance between the electrode and the stratum corneum. Elevated impedance is one of the most common sources of baseline drift, 50/60 Hz interference and motion artefacts in ECG, EEG and EMG recordings. A standardised conductive spray reduces this variability and helps diagnostic teams obtain clean, interpretable traces from the first attempt.

HaseMed Electrode Spray in bulk format is intended for use by healthcare professionals and trained technicians in:

• Cardiology & internal medicine: Resting ECG, stress ECG, long-term Holter and telemetry monitoring where stable lead signals are critical over extended periods.
• Neurology & sleep medicine: EEG routine recordings, polysomnography and long-term monitoring that require consistent electrode contact across multi-hour sessions.
• Rehabilitation & sports medicine: Surface EMG assessments where motion artefacts must be minimised during dynamic protocols.
• Emergency medicine & pre-hospital care: Rapid electrode preparation under time pressure in ambulances, resuscitation rooms and mobile ICUs.
• Outpatient diagnostics & home visits: Portable ECG, home sleep testing and telemonitoring set-ups where a compact, fast-acting preparation step is essential.
• Education & training: Medical schools, nursing programmes and simulation centres that benefit from a standardised, reproducible skin-preparation step.

Application

Use HaseMed Electrode Spray for external skin preparation only. Avoid contact with the eyes and mucous membranes. When applying to larger body areas or on sensitive skin, test compatibility on an inconspicuous area first.

1. Prepare the site: Expose the intended electrode position and gently wipe away moisture, lotions or loose skin particles.
2. Apply the spray: Hold the decanted bottle a short distance from the skin and apply a thin, even mist to each electrode position.
3. Place the electrodes: Position the ECG, EEG or EMG electrodes immediately, press briefly to ensure full contact, and start the measurement.
4. After the recording: Remove the electrodes and clean the skin according to your standard operating procedure. The spray is designed to leave no sticky residue that would hinder removal.

For bulk canisters, decant into smaller trigger or pump bottles at a dedicated refill station. Always close the canister tightly after use and store upright.

Package contents & available sizes

• 1x HaseMed Electrode Spray canister in the selected bulk size
• Available bulk sizes: 5L, 10L, 20L
• Smaller pump-bottle formats (250ml to 6L) are available as a separate HaseMed listing for point-of-care use.

Frequently asked questions

Which bulk size should I order?
Choose 5L for single departments or smaller practices, 10L for busy cardiology, neurology or sleep units, and 20L for central supply rooms, EMS fleets and teaching hospitals that refill smaller bottles in-house.

Is the spray compatible with standard ECG and EEG electrodes?
Yes, the formulation is intended for common ECG and EEG electrode surfaces. For large-area or prolonged applications, verify material compatibility on an inconspicuous area first.

Can it be used in emergency and pre-hospital settings?
Yes, the fast, cotton-free application makes it well suited to time-critical electrode placement in ambulances, resuscitation rooms and mobile ICUs.

How does this differ from the smaller HaseMed Electrode Spray pump bottles?
The formulation is the same; the bulk canisters are optimised for high-volume users and refill workflows, while the smaller 250ml to 6L bottles are designed for direct point-of-care use at the bedside or exam room.