Dispoñible
HaseMed luvas de lavado de algodón, 50 ud.
2,96 €
por unidade de venda
IVE incluído, máis custos de envío
(50 ud. | 0,06 € / 1 ud.)
A partir de 4 unidades de venda: 2,61 € por unidade de venda
Sprache
Versandland
Die MwSt. richtet sich nach dem Versandland.
HaseMed
Núm. de artigo HAS-73-1
Bomba dosificadora de precisión para enroscar en garrafas de 5 l e 10 l con rosca DIN 45. Cada pulsación entrega 30 ml de líquido e converte unha garrafa grande de xel de ecografía, spray de electrodo...
Marcado CE conforme ao Regulamento europeo sobre os produtos sanitarios (MDR 2017/745). A declaración de conformidade pódese solicitar.
Contacto: service@hasemed.com
The HaseMed Canister Dispensing Pump DIN 45 is a precision screw-on dosing pump engineered for 5L and 10L canisters with a DIN 45 thread. Each stroke delivers a reproducible 30 ml of fluid, turning bulk canisters of ultrasound gel, electrode spray, surface disinfectant or liquid soap into a clean, controlled point-of-use dispenser. The white polypropylene body, long dip tube and angled discharge spout keep drips off the bench and medium off the user's hands, so medical, care and industrial teams can refill, prep and clean without decanting into smaller bottles.
DIN 45 is the narrower of the two common HaseMed canister threads. Before ordering, check the neck of your canister: this pump is dedicated to DIN 45 necks. For canisters with the wider DIN 51 thread, use the HaseMed Canister Dispensing Pump DIN 51 instead. Getting the thread right means the pump seats flush, the seal holds under repeated stroking, and the dip tube reaches the bottom of a standard 5L or 10L container without flex or leakage.
HaseMed offers this pump in two thread variants to fit the two common canister neck sizes used across European medical and hygiene supply chains. The size refers to the canister opening, not the pump itself:
If in doubt, measure the outer diameter of your canister thread or check the container's technical data sheet before ordering. A mismatched thread will not seal and can leak under stroke pressure.
Use only with suitable liquid media. Check material compatibility before use with high-viscosity, solvent-based, strongly acidic or alkaline products, as these can damage the polypropylene body or seals. Rinse thoroughly before first use and whenever switching between products. Protect the pump from prolonged UV exposure and heat during storage, and flush with clean water after extended idle periods so the suction tube and piston remain free-moving. This pump is a dispensing accessory; follow the safety data sheet and dosing instructions of the medium you are dispensing.
The HaseMed Canister Dispensing Pump DIN 45 is a precision screw-on dosing pump engineered for 5L and 10L canisters with a DIN 45 thread. Each stroke delivers a reproducible 30 ml of fluid, turning bulk canisters of ultrasound gel, electrode spray, surface disinfectant or liquid soap into a clean, controlled point-of-use dispenser. The white polypropylene body, long dip tube and angled discharge spout keep drips off the bench and medium off the user's hands, so medical, care and industrial teams can refill, prep and clean without decanting into smaller bottles.
DIN 45 is the narrower of the two common HaseMed canister threads. Before ordering, check the neck of your canister: this pump is dedicated to DIN 45 necks. For canisters with the wider DIN 51 thread, use the HaseMed Canister Dispensing Pump DIN 51 instead. Getting the thread right means the pump seats flush, the seal holds under repeated stroking, and the dip tube reaches the bottom of a standard 5L or 10L container without flex or leakage.
HaseMed offers this pump in two thread variants to fit the two common canister neck sizes used across European medical and hygiene supply chains. The size refers to the canister opening, not the pump itself:
If in doubt, measure the outer diameter of your canister thread or check the container's technical data sheet before ordering. A mismatched thread will not seal and can leak under stroke pressure.
Use only with suitable liquid media. Check material compatibility before use with high-viscosity, solvent-based, strongly acidic or alkaline products, as these can damage the polypropylene body or seals. Rinse thoroughly before first use and whenever switching between products. Protect the pump from prolonged UV exposure and heat during storage, and flush with clean water after extended idle periods so the suction tube and piston remain free-moving. This pump is a dispensing accessory; follow the safety data sheet and dosing instructions of the medium you are dispensing.
| Variante | Bruto | Estado |
|---|---|---|
| Default Title | 7,13 € | Non dispoñible |
Expedición AutoStore desde Berlín. Os pedidos feitos antes das 12:00 (CET) envíanse o mesmo día laborable. Envío con DHL e DPD con seguimento.
Custos de envío en Alemaña: Ata 1 kg: 3,99 € · Ata 2 kg: 4,99 € · Máis de 2 kg: 5,99 € ·
Prazo de entrega: Alemaña 1 a 3 días laborables · AT/NL/BE 3 a 5 · FR/IT/ES 4 a 7 días laborables
Devolución: 14 días de dereito de devolución. Contacto: service [at] hasemed [dot] com · instrucións de desistimento